banner
blog
Home blog

blog

  • Operation instructions and battery maintenance of UAV Signal Jammer
    • Dec , 02 2023
    Operation instructions and battery maintenance of UAV Signal Jammer

    When using UAV Signal Jammer, first check whether the power is sufficient and aim at the direction of UAV; Secondly, turn on each signal frequency switch, UAV forced landing mode, UAV slow landing; If the GPS switch is not turned on, the UAV can return according to the original flight route in the return mode; When the control switch device is in the working mode, the UAV can be forced to land or ...

  • Can the wall affect the interference effect of mobile phone signal jammer?
    • Dec , 02 2023
    Can the wall affect the interference effect of mobile phone signal jammer?

    It is often mentioned that the interference effect of mobile phone signal jammer will be weak if there is a wall. There are several possibilities: First, look at the mobile phone signal jammer itself. The mobile phone signal jammer transmits radio frequency signals specifically for mobile phone signals. It will attenuate when encountering obstacles in the transmission path, and the error degree of...

  • Is there a vehicle mounted high-power jammer?
    • Dec , 02 2023
    Is there a vehicle mounted high-power jammer?

    Nanjing Baikang electromechanical produces vehicle mounted full band high-power jammer.   The high-power jammer is used at the explosion / bomb removal site: to prevent wireless detonation, car bomb, remote control bomb, etc., and avoid unnecessary casualties; For emergencies, the on-board high-power jammer can quickly arrive at the scene, seal and control communication signals and control pu...

  • What should we pay attention to when using the Signal Jammer
    • Nov , 25 2023
    What should we pay attention to when using the Signal Jammer

    Before starting up, ensure that the antenna is connected reliably, and the antenna should correspond to the corresponding identification on the host one by one. It is strictly prohibited to use without connecting the antenna. Recommended installation height for small power: 1.8-2.5m. Recommended installation height for high power: 3-10m When the omnidirectional whip antenna configured by the signa...

  • Why can't Signal Jammer shield 5g signal
    • Nov , 25 2023
    Why can't Signal Jammer shield 5g signal

    The reason why the mobile phone can call and surf the Internet is that the wireless channel can be established between the mobile phone and the base station through wireless electromagnetic wave, so as to establish a connection with the whole communication network. Linear electromagnetic waves have different working frequency bands. Different frequency bands have different uses, some for police, s...

  • Seamless connection between mobile phone signal jammer and police
    • Nov , 25 2023
    Seamless connection between mobile phone signal jammer and police

    The mobile phone signal jammer interferes and covers the radio signal by transmitting high-power multi band radio waves. It is usually used to interfere with the frequency of the remote-controlled explosive device at the explosive disposahttp://www.sma818.coml site, so that the explosive device cannot be detonated. At present, the rapid development of wireless network has not only brought great co...

  • Why can't Signal Jammer shield 5g signal
    • Nov , 18 2023
    Why can't Signal Jammer shield 5g signal

    The reason why the Signal Jammer can call and surf the Internet is that the wireless channel can be established between the mobile phone and the base station through wireless electromagnetic wave, so as to establish a connection with the whole communication network. Linear electromagnetic waves have different working frequency bands. Different frequency bands have different uses, some for police, ...

  • Why can't Signal Jammer shield 5g signal
    • Nov , 18 2023
    Why can't Signal Jammer shield 5g signal

    The reason why the Signal Jammer can call and surf the Internet is that the wireless channel can be established between the mobile phone and the base station through wireless electromagnetic wave, so as to establish a connection with the whole communication network. Linear electromagnetic waves have different working frequency bands. Different frequency bands have different uses, some for police, ...

  • Operation instructions and battery maintenance of UAV Signal Jammer
    • Nov , 18 2023
    Operation instructions and battery maintenance of UAV Signal Jammer

    When using UAV Signal Jammer, first check whether the power is sufficient and aim at the direction of UAV; Secondly, turn on each signal frequency switch, UAV forced landing mode, UAV slow landing; If the GPS switch is not turned on, the UAV can return according to the original flight route in the return mode; When the control switch device is in the working mode, the UAV can be forced to land or ...

    A total of

    53

    pages

Copyright © 2024 NanJing BoKang Electromechanical Technology CO.,LTD.All Rights Reserved.

IPv6 network supported

IPv6 network supported

top
NanJing BoKang Electromechanical Technology CO.,LTD

Send A Message

Send A Message

    If you are interested in our jammers and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #