For the installation of the signal shield, it is relatively simple and it is basically not technically difficult. However, a few small details before installation determine the effect of the subsequent use of this mobile phone signal shield, such as the environment near the installation site, the installation height, and the installation method, etc. These factors will directly affect the shielding effect of the mobile phone signal shield.

1.In order to ensure good signal effect, the shield installation height is about 1.8m to 2.5m. This installation height can maximize the shielding effect of the shield. With the equipped mounting slices, the wall can be fixed with expansion tubes and screws or the mobile phone signal shield can be placed directly on the ceiling. When placing on the ceiling, you need to pay attention to the metal material when the ceiling is not available. If the ceiling is made of metal, then the signal shield is not suitable for placing on the ceiling because the metal ceiling will block the signal, the mobile phone signal shield has very weak penetration to the metal ceiling, and the interference signal emitted by the shield cannot penetrate the metal ceiling, which results in no shielding effect. Of course, you can also place the mobile phone signal shield directly on the desktop.

2. After installation, check if the power cord of the shield is reliable and reliable, then you can connect the power supply of 220V municipal power, then turn on the power switch of the mobile phone signal shield, and finally pay attention to whether the power indicator on the shell panel of the mobile phone signal shield host shows normal, such as when the power knowledge light is not on, or when the shielding effect of the mobile phone signal is very poor, Please contact the equipment supplier in time.

"Shengma" signal shield | Nanjing Baikang Mechanical Technology Co., Ltd-ljw