
How to use test site shield effectively?
Although
the signal brings convenience to many people, and in many cases the function of
the signal is also very strong, but the limitation of the signal is that it can
form some interference. In order to reduce the interference caused by the
signal, the test room shield can effectively shield the mobile phone signal, so
that the mobile phone does not need to shut down, avoiding some more
troublesome operations.
1.
When the site area is larger than the effective shielding range, it is
recommended to install multiple shielding devices. Since the power supply and
antenna are specially designed to support the host, do not use them interchangeably
when factory debugging. _
2.
The frequency emitted by the test site shield interferes with the frequency of
the mobile phone receiving base station. The relationship between the shield
and the base station is bound to be a race. If the transmission power of the
signal shield is less than the transmission power of the base station to the
mobile phone in the current environment, the shield can not be shielded, only
the signal can be shielded.
3.
How many meters a shielding layer can shield depends not only on its
transmission power, but also on the distance of the base station in the usage
environment. It also plays an important role in building and signal
amplification, which is done in some buildings. Of course, the effective
coverage of the shield is not a specific value, but may also be affected by
some factors. When we use it, we can check the shielding effect of the device
by checking the mobile phone, and whether the current environment is in a
certain range. _
Therefore,
at a certain transmission power, the field strength in the interference area
affects the interference range, no matter how large the device is, as long as
the transmission power is a fixed value, as the distance increases, the
interference signal strength of the device will gradually decay, thus losing
its interference ability. This is why the interference range is also different
under different signal field intensities.
"Shengma"
test site shield | Nanjing Baikang Mechanical Technology Co., Ltd-ljw
Categories
Recent Posts
Copyright © 2022 NanJing BoKang Electromechanical Technology CO.,LTD.All Rights Reserved.
IPv6 network supported