banner
Bokang-BLOG
Home

Bokang-BLOG

Is it feasible to crack smart jammers on the network?

Is it feasible to crack smart jammers on the network?

  • 2022/07/12

In some special occasions, the use of mobile phones is restricted, and the most common is to install intelligent jammer on site. However, there are always individuals thinking about how to crack their hands so that their mobile phones can be used normally. Is the cracking method of online search right.

 

If you want to crack the shielded mobile phone signal, you must first understand the working principle, that is, to transmit white noise signals with the same frequency as the mobile phone signal, so as to interfere with the mobile phone receiving the signal of the base station. The mobile phone shows no signal, limited service, etc. The size of the shielding range of the equipment depends on the transmission power of each module in the equipment and the signal field strength of the base station on the use site. Theoretically, the larger the transmission power of the intelligent jammer, the larger the shielding range. The stronger the signal from the base station to the use site, the smaller the shielding range of the equipment.

From the perspective of principle, it is still very difficult to crack. Of course, there are still some methods. The cracking methods searched on the Internet are completely useless.

Now let's introduce the cracking methods given by professional manufacturers for reference only

Without damaging the equipment, if you want to recover the mobile phone signal within the shielding range of the intelligent jammer, there are only two ways. One is that the mobile phone leaves the interference range, the mobile phone leaves the coverage range of the shielding instrument, and the mobile phone signal automatically recovers. The other is not to leave the coverage of the shielding device, only to enhance the signal strength of the base station, so as to narrow the shielding range of the shielding device. At this time, the mobile phone signal is restored. Of course, this kind of operation is also relatively difficult. The establishment of a base station needs to be demonstrated, and the strength of the mobile phone signal transmitted by the base station is not enhanced if you want to enhance it. It is all a multi-dimensional consideration.

What is said on the Internet is to change the network setting to manual search through mobile phone settings, and adjust the mobile phone reception frequency to increase. In the actual operation of these two methods, the mobile phone still has no signal

Copyright © 2022 NanJing BoKang Electromechanical Technology CO.,LTD.All Rights Reserved.

IPv6 network supported

IPv6 network supported

top
NanJing BoKang Electromechanical Technology CO.,LTD

Send A Message

Send A Message

    If you are interested in our jammers and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #