banner
Bokang-BLOG
Home

Bokang-BLOG

Is it necessary to conduct on-site test before installing the mobile phone jammer?

Is it necessary to conduct on-site test before installing the mobile phone jammer?

  • 2022/07/21

Before installing the mobile phone jammer, you need to know the scope and area of the required interference, such as the conference room, which is generally divided into three types: small conference room, medium-sized conference room and large conference room. Before installation, the test methods for these three types of conference room mobile phone jammers are also different, and the environment of these three types of conference rooms is completely different.

    

 

 The small area is relatively small, the surrounding environment is relatively simple, and the requirements are not very high. During the test, you only need to place the mobile phone jammer in the conference room on the desktop near the wall, and then test whether the mobile phone is interfered at the farthest distance from the device.

 Medium sized conference rooms are generally located in high-rise office buildings. The higher the floor, the stronger the signal from the base station to the conference room. In addition, there are basically signal amplifiers in the office building. It is necessary to test the signal strength of various frequency bands respectively, and then adjust each frequency band of the mobile phone jammer in the conference room, or increase the power of some frequency bands, so as to meet the interference requirements of medium-sized conference rooms, A certain frequency band with strong signal can be covered separately by high-power module, and then the mobile phone signal with relatively weak signal can be interfered by low-power shielding equipment.

 

Large conference rooms are relatively large and can accommodate a large number of people, such as the Great Hall of the people. In this environment, shielding mobile phone signals is not ordinary low-power. High power is needed to meet the purpose of covering the mobile phone signal in the whole conference room, and according to the signal strength of all mobile phone signal bands in the venue, the signal strength of the transmitting signal source should be adjusted to reduce the mobile phone signal in the venue, so that the shielding mobile phone signal equipment can play the greatest role.

Copyright © 2022 NanJing BoKang Electromechanical Technology CO.,LTD.All Rights Reserved.

IPv6 network supported

IPv6 network supported

top
NanJing BoKang Electromechanical Technology CO.,LTD

Send A Message

Send A Message

    If you are interested in our jammers and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #