The installation of the signal shield is relatively simple and basically has no technical difficulty. However, several small details before installation determine the subsequent use effect of the mobile phone signal shield, such as the environment near the installation site, the installation height, and the installation method. These factors will directly affect the shielding effect of the mobile phone signal shield.

1. in order to ensure better signal effect, the installation height of the shield is about 1.8m to 2.5m. This installation height can maximize the shielding effect of the shield. The equipped installation hanging piece, together with the expansion pipe and screws, can be fixed on the wall or the mobile phone signal shield can be directly placed on the ceiling. When placing on the ceiling, it should be noted that the ceiling cannot be made of metal, If the ceiling is made of metal, the signal shield is not suitable to be placed on the ceiling. This is because the metal ceiling will block the signal. The penetration of the mobile phone signal shield to the metal ceiling is very weak. The interference signal emitted by the shield cannot penetrate the metal ceiling, resulting in no shielding effect. Of course, the mobile phone signal shielding device can also be directly placed on the desktop for use.

2. after installation, check whether the power line of the shield is reliably connected. Then connect the 220V mains power supply, turn on the power switch of the mobile phone signal shield, and finally observe whether the power indicator on the shell panel of the mobile phone signal shield host displays normally. If the power knowledge light is not on, or the shielding effect of the mobile phone signal is very poor, Please contact the equipment supplier in time.

"Shengma" signal shield | Nanjing Baikang Mechanical Technology Co., Ltd-ljw