For mobile phone smart shield installation, it is relatively simple and basically not technically difficult. However, a few small details before installation determine the effect of this mobile phone shield on subsequent use, such as the environment near the installation site, installation height, and installation method, all of these factors will directly affect the shielding effect of mobile phone shield.

1. In order to ensure that the signal emitted by the smart shield can achieve good results, it is recommended that the installation height of the mobile phone signal shield be from 1.8m to 2.5m. This installation height can maximize the shielding effect of the mobile phone smart shield. When placed on the ceiling, the mobile phone signal shield can be fixed on the wall or placed directly on the ceiling using the mounting slices equipped with expansion tubes and screws. It is important to note that when the ceiling is not metal, if the ceiling is metal, then the mobile phone shield is not suitable for placing on the ceiling, because the metal ceiling can block the signal, the mobile phone shield has very weak penetration to the metal ceiling, and the interference signal emitted by the mobile phone shield cannot penetrate the metal ceiling, which results in no shielding effect. Of course, you can also place the mobile phone shielder directly on the desktop for use.

2. After the smart shield is installed, check if the power cord of the mobile phone signal shield is reliably connected. Then you can connect the shield to 220V power supply of municipal power, turn on the power switch of the mobile phone shield, and finally observe if the power indicator on the shell panel of the mobile phone shield host shows normal, such as when the power knowledge light is not on, or when the shielding effect of the mobile phone signal is very poor. Please contact the equipment supplier in time.

"Shengma" Smart Shield | Nanjing Baikang Mechanical Technology Co., Ltd-ljw