Does the customer need to debug the electronic jammer after receiving it?
The customer does not need any debugging after receiving the electronic jammer, only needs to test the jamming effect after power on. Before the jammer leaves the factory, each frequency band is subject to strict debugging and aging. The goods are allowed to be delivered after passing the test. After receiving the electronic jammer, the customer does not need to conduct debugging. Just connect the 220V mains power to test the jamming distance through the mobile phone.
Since the interference distance of electronic jammer is closely related to the field environment and signal strength, the interference distance is different in different places. The interference distance of mobile phones of different operators will be different in the same field environment. This is because each frequency band of the electronic jammer is output according to the maximum output power, generally 2-3W. However, under the same environment, the signal strength of the three major operators can be divided into strong and weak, and the interference distance affecting the jammer is related to the signal strength of the mobile phones of the three major operators. The stronger the signal, the shorter the interference distance. The weaker the signal, the farther the interference distance. Thus, different mobile phone interference distances of different operators are different.
If the jamming distance of the electronic jammer on the site is relatively short, the jamming distance of the jammer is not ideal because the base stations around the jamming site are relatively close. At this time, high-power machines can be replaced. It is recommended that the model produced by Nanjing Baikang Electromechanical Technology Co., Ltd. be sma-818k90. This high-power electronic jammer has a single channel output of 10-15w, and can also customize a certain carrier band with poor jamming effect.
Floor 3 / 4, building 37, Liandong U Valley International Enterprise port, 1001 Fuying Road, Jiangning District, Nanjing, Jiangsu Province, China
