After purchasing a high-power drone jammer, customers will face the problem of how to install and debug. The first thing to solve is how to choose the installation location. There are usually two options for the recommended installation location or installation method given by us. One is to use the height of the building and install it directly on the roof of the building. The second is to erect the installation pole separately, and install the drone jammer on the top of the pole. Among the two suggested methods, the preferred solution is the first one, because if the equipment is installed on the roof of the building, the construction difficulty and the investment installation cost will be greatly reduced. So, in the specific project implementation process, how can the drone jammer be installed on the roof of the building?

It is critical to choose which building roof to install on. A reasonable option is to choose the building with the highest floor on site and use its roof to install the drone jammer. In this way, it is possible to avoid unnecessary attenuation due to the blocking of other buildings during the transmission of the anti-drone interference signal to the surrounding.

When installing a drone jammer on the roof, it is necessary to ensure that the main unit of the device has a waterproof function. At the same time, when each transmitting antenna, feeder, and power cable are connected to the main unit, each connection port must be waterproof or insulated. If conditions permit, it is recommended to add an antenna protective cover to the antenna.

After the drone jammer is installed, its height will inevitably be higher than the height of the top of the building. At this time, it is necessary to additionally consider adding lightning protection and lightning protection measures to the drone jammer. Two of the most important points are: the first point is the height of the lightning rod, which must be at least 1-2 meters higher than the highest point of the antenna. The second point is that the lightning rod must have a ground wire, and the ground wire must be insulated from all parts of the entire system.

The last thing to consider is: since the drone jammer is installed at a higher position on the roof and the main air is windy, the main unit of the equipment must be fixed and reliable, and the brackets and poles of the equipment must be firmly fixed on the On the roof of the building, if conditions permit, it is recommended to increase the cable to ensure the stability of the pole.