After some large units install the mobile phone signal jammer system, they often ignore the follow-up repair and maintenance of the system. After a period of accumulation, it is possible that due to a number of small problems, the accumulation of small things may lead to the operation of the entire system. Instability, then, how should these units that install mobile phone signal jammer systems formulate system overhaul and maintenance plans?

Here, based on years of on-site experience, we propose some routine and relatively easy-to-implement suggestions:

1. Check and repair the hardware faults in the mobile phone signal jammer system, and prevent the disconnection of network lines and power supply lines;

2. Carefully review whether each IP parameter in the software setting is unique, and whether the marked name and location match the actual installation location. The IP of each jammer terminal in the mobile phone signal jammer system is unique, and there should be no devices with overlapping IP addresses in the entire system;

3. The maintenance order of the mobile phone signal jammer system: A: First check the IP setting error and correct it; B: Use the software to first find out the jammer terminals that fail to communicate in the entire row, column or building. It is a line problem, and the problem of network disconnection and power outage of this line should be solved first; C: For scattered jammer terminals, one-to-one investigation is required.

4. The fast and good operation of the entire mobile phone signal jammer system is based on the premise that each device and each node in the system is powered normally and the network communication is normal. When a single node or several branch lines are disconnected in the system software , the more the quantity accumulates, the longer it will take to query the work status as a whole. Therefore, it is strongly recommended that after completing the overall overhaul of the system again and returning to normal, assign a dedicated person to monitor and query each node on a regular basis. After discovering individual node failures, it should be reported immediately and personnel should be arranged to repair and recover. You can't just report without repairing, and you can't accumulate more!

5. It is clearly stipulated that every node or equipment terminal in the entire mobile phone signal jammer system cannot be powered off or disconnected without permission;