Many cities have built multiple conference centers. When these conference centers organize and hold various types of meetings, as an important auxiliary measure to maintain the order of the venue and ensure the safety of the meeting, it is to install a jammer system at the venue. When designing the center's jammer system scheme, how to do the design planning?

A complete and reasonable system scheme design requires a large amount of information to be aggregated, and possible problems to be predicted in advance to avoid unnecessary troubles. This is the basic principle of a good jammer system scheme design. Here, we list some commonly encountered problems for reference:

1. Each meeting room in the conference center is beautifully decorated, so it must be required that the jammer system should not damage the original decoration during installation, and should not appear obtrusive. It is best to have a certain degree of concealment;

2. The indoor height of some conference centers is very high. When the height exceeds 10 meters, the jammer system cannot be installed on the top of the conference room when the jammer system is designed, because it is very likely to cause signal interference. Insufficient range to effectively interfere with the area below;

3. Some conference centers will install a mobile phone signal amplifier inside, and its function is to amplify the signal of the mobile phone base station twice in the building. But it is precisely because of its existence that it will have a serious impact on the performance of the jammer system, so it is strongly recommended that the indoor signal amplifier must be avoided or the two must not work at the same time in the design of the scheme.

4. For large venues in some conference centers, when a single indoor area reaches 500 square meters or even larger, a medium-power mobile phone signal jammer can be considered in the jammer system;