Some important government agencies or military secret units, after selecting and purchasing high-power fixed UAV jamming systems, usually install them outdoors, so the key issues that need to be considered during the installation process are: How to take waterproof and lightning protection measures when the man-machine interference system is installed outdoors?

Usually there are two ways for outdoor installation: the first is to use the height of the building and choose to install it on the roof of the building. This method saves time and effort, and the installation difficulty is relatively low. As long as the host of the UAV jamming system finds a suitable fixed position on the roof to fix it. The host of the system has waterproof performance. After the antenna is fixed and installed, the antenna and the radio frequency port of the host are connected by a radio frequency cable. At this time, it is necessary to focus on the waterproof protection of the RF connection port. It is recommended to use waterproof tape or sealant for waterproof treatment. When the entire UAV jamming system is installed on the roof of the building, the original lightning protection facilities of the building can be used for effective lightning protection. Special attention should be paid to the height of the antenna cannot exceed the height of the lightning rod of the building.

The second outdoor installation method is to install the drone jamming system on the street light pole or iron tower. The construction difficulty of this installation method is relatively high, and special attention should be paid to waterproofing and lightning protection during the installation process. The more standard installation method we recommend is: the antenna is installed in the upper middle and upper part of the street light pole, and the antenna and RF cable are installed in the customized fiberglass radome, which can have very effective waterproof performance. The host of the drone jamming system can be installed at the lower end of the FRP radome, and attention should be paid to the waterproof protection of the RF port and power supply interface.