Importance of fast heat dissipation to Signal Jammer
Midsummer June is about to usher in the annual college entrance examination. In order to ensure the quality of the examination, many schools have started to prepare for arranging the examination room in advance. One of the more important tasks in arranging the examination room is to install a signal jammer to interfere with the mobile phone signal in the examination room, so as to prevent cheating through mobile phones and ensure the fairness of the examination room.
It is believed that the standardized examination room will basically be equipped with a test room Signal Jammer. However, the machine will be heated after being used for a period of time, and the heating may affect the normal use of the machine. Once the heat is too late to dissipate, it will cause the frequency offset of the jammer. As a result, when the machine is just started to use, it can normally interfere with the mobile phone signal. After working for a period of time, some mobile phones can not interfere. Therefore, the heat dissipation capacity of the jammer shall be considered when it is installed and used. There are also differences in the heat dissipation capacity of signal jammers of the same brand. How does the jammer dissipate heat? In the past, the old-fashioned jammer could only fall down slowly by relying on the natural temperature. But now, most signal jammers will open the cooling hole group and install the cooling fan, which can help the instrument reduce the temperature as soon as possible. However, due to the different components used by different manufacturers, the noise level produced by these fans during operation is also different. The Signal Jammer produced by Nanjing Bokang Electromechanical Technology Co., Ltd. uses a professional circulating air duct type cooling base structure, which quickly absorbs natural wind at the lower end and removes heat at both sides of the upper end. In high temperature environment, it can quickly transfer heat to the cooling base to avoid local accumulation of heat. The cooling base is equipped with 4 fans, which can quickly blow the heat to the upper part and quickly discharge it through the fans on both sides of the upper end. The heat dissipation fan equipped with the jammer is not only silent during operation, but also has very good heat dissipation effect. It can work continuously for a long time to ensure the stable output of each frequency band. It is more suitable for providing a quiet examination environment for candidates during the examination.
Floor 3 / 4, building 37, Liandong U Valley International Enterprise port, 1001 Fuying Road, Jiangning District, Nanjing, Jiangsu Province, China
