After the customer chooses and purchases our company's high-power UAV jammer, and adopts the correct and standardized installation equipment, the jamming effect against the drone will be maximized. So, what are the precautions for the installation of this high-power UAV jammer?

First of all, the installation location of the UAV jammer, the preferred location is the roof of some tall buildings. When installing in this environment, you only need to erect the host of the UAV jammer on the ground on the roof. The transmitting antenna can be erected by a simple bracket.

Secondly, if there is no building of suitable height to use, it can only be used as a pole (street light pole). The host and antenna of the UAV jammer need to be installed on the upper end of the street light pole. This installation method looks simple, but the construction process is still relatively difficult. Street light poles must have a solid foundation. When fixing the main unit and antenna of the UAV jammer to the top of the street light pole, it must be strong and stable! During the construction process, it is even necessary to resort to the help of a crane.

Whether the UAV jammer is installed on the roof of a building or on the top of a street light pole, lightning protection measures must be taken at the same time. The usual practice is to add a lightning rod (lightning rod) near the antenna. ), and the height of the lightning rod must be at least 1-3 meters higher than the antenna. The lightning rod is connected to the ground through a metal wire. It must also be noted here: lightning rods and metal wires must be well insulated from the UAV jammer equipment.

The case in the picture is our company's SMa-818K200-UAV type high-power UAV jammer just installed by the customer。