SMa-818T5 Draw-Bar High-Power Wireless Signal Jammer Wireless Signal Shield is suitable to protect important leadership or VIP security, individual combat, SWAT teams, EOD teams, anti-terrorist units, anti-drug units, bomb squad, security checkpoints, administrative law enforcement, hostage negotiations, border control and military security forces and other application areas. Full-band wireless shielding device (common band: 20~6000MHz) consist of two draw-bar signal jammers; Signal Shield System can be portable use, or vehicular use. Vehicle-specific antenna can be configured according to customers’ requirements.
Item NO.:
SMa-818T5Direction of jammer:
Omnidirectional coverage standard omnidirectional antennaJamming range:
jamming radius: 100~500m (-75dbmFrequency band (module) ratio:
1 set ≤ 5 frequency bands (modules) , Frequency band (module) power: 50~100WPower supply mode:
AC IN , DC IN , Built in BatteryOptional frequency band type:
20MHz~6000MHzFunctional characteristics:
● output power can be set by software , ● quick module removal and replacement , ● remote control management , ● portableSMa-818T5 Draw-Bar DDS Digital Modulation Technology
High-Power Wireless Signal Jammer
SMa-818T5:
It is suitable to protect important leadership or VIP security, individual combat, SWAT teams, EOD teams, anti-terrorist units, anti-drug units, bomb squad, security checkpoints, administrative law enforcement, hostage negotiations, border control and military security forces and other application areas.
Full-band wireless shielding device (common band: 20~6000MHz) consist of two draw-bar signal jammers; it can be portable use, or vehicular use.
Vehicle-specific antenna can be configured according to customers’ requirements.
6)Output Channel:10 output channels(DDS digital modulation technology channel module)
11)ISO9001:2008 quality management system.
Frequency parameters can be customized. Typical frequencies are shown below
Band parametric |
Channel |
Signal types |
RF power |
25-100 |
All kinds of remote controller |
50 |
|
135-174 |
Civilian interphone |
50 |
|
310-317 |
Interphone/car remote controller |
50 |
|
400-470 |
Interphone/CDMA450M |
50 |
|
867-960 |
CDMA/GSM |
50 |
|
1100-1300 |
Other Wireless Signals |
50 |
|
1525-1675 |
GPS/Satellite Phone |
50 |
|
1805-1920 |
DCS/PHS/FDD-LTE/TDD-LTE |
50 |
|
2110-2170 |
WCDMA/CDMA2000 |
50 |
|
2400-2485 |
Wi-Fi/Bluetooth/WLAN/ |
30 |
|
2515-2675 |
TDD-LTE/FDD-LTE/5G NR N41 |
30 |
|
3400-3600 |
5G NR N78 |
30 |
|
4800-4900 |
5G NR N79 |
30 |
|
5725-5850 |
Wi-Fi 5.8G |
30 |
|
Total power(RF) |
600W |
||
Host size |
560x470x270(excluding protruding) |
||
Antenna size |
1430Ф35(LF)/760Ф35(HF) |
||
Antenna type |
High-gain Omni-antenna(10dBi) |
||
Power supply |
AC vehicle generator(about 3000W) |
||
Weight |
70Kg(2chassis) |
||
TEMP/Humidity |
-20℃-+50℃/≤80% |
||
Box Design |
PELICAN carton is shockproof and pressure-resistant; portable use with draw-bars |
A: Unpacking Inspection
1) Check main devices and components according Packing List. Please contact the manufacture if any part missing.
2) Confirm the quantity and labels of antennas
B: Antenna Installation
1) Low Frequency antenna is long and is recommended to be installed at the back of the vehicle.
2) High Frequency antenna is recommended to be installed on the roof. An antenna mount with a turnover mechanism is optional, so that the antenna can be folded and put on the roof when it is stand by.
3) 4X4 ORV (Off-Road Vehicle) is recommended.
C: Vehicle Power Supply
1) Portable generator is necessary to provide high-power (AC).
2) Output of generator is not less than 3500VA.
3) A BUFFALO Power Generator is recommended for low-noise, small-size and high-power portable application.
D: Cooling & Ventilation
1) This product has an intelligent cooling and ventilation system, and auxiliary cooling is unnecessary.
2) Air intake/exhaust is recommended to ensure air circulation in vehicle.
The device is robust housing, dustproof, shockproof. Flexible power supply ways, such as external AC power, built-in battery, external battery box and generator.
Modular designed, each component is pluggable, can be replaced directly, it has five high-power shielding modules, which can combination randomly, frequency can be customized.
Flexible controlling ways, like directly control on the machine, or controlled by external line-control-box.
Each draw-bar box can assemble five high-power modules, and each module can be customized.
Each module can be any combination according to frequency requirements.
Each module is designed with three indication lights, to show Power, Run and Alarm (reflective self-excited fault alarm).
Each module has its own module switch, switch on or switch off optionally according to field application requirements.
Each module is independent of each other, pluggable and replaced directly, and it would not affect the normal working of other modules.
Put the chassis upright, find the pull rod handle.
Poke out buckle, stretching up the rod handle at the same time.
Transfer the equipment by dragging or directly pick up the chassis by handle, easy to transfer.
Ensure the AC power line aerial plug connect with the host reliably, and then connect AC plug with AC socket.
Connect the aerial plug of line control box cable with line control box.
Connect another aerial plug of line control box cable with the host line control box interface.
Use Lithium iron phosphate battery to ensure safe application.
The built-in battery capacity of draw-bar box: 24V35Ah
Type |
RFE-8F35 |
Voltage |
27V |
Resistance |
24MΩ |
Size |
225x150x130mm |
Charging current |
0.2C |
Discharging current |
1C |
Weight |
8Kg |
Charger input |
AC 100-230V |
Charger output |
DC 29V/5A |
The battery capacity of external battery box: 24V35Ah
Type |
RFE-8F35 |
Voltage |
27V |
Resistance |
24MΩ |
Size |
430x245x340mm |
Charging current |
0.2C |
Discharging current |
1C |
Weight |
12Kg |
Charger input |
AC 100-230V |
Charger output |
DC 29V/5A |
2 Line Control Box
Switch on/off each module by pressing keyboard on line control box.
It is convenient for operator in the cab to control each module in any situations.
The LCD can show both external and internal battery capacity and power work status.
Frequency band within 20~3000MHz can be any customized according to needs.
Silkscreen OEM service can be offered for 5 jammers or above.
Neutral jammers can be provided.
If you are interested in our jammers and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Copyright © 2024 NanJing BoKang Electromechanical Technology CO.,LTD.All Rights Reserved.
IPv6 network supported